(In case of unwanted tripping after an electrical fault)
HOW TO CHOOSE MCB RECLOSER Control Mode?
Recloser 6 type choice
GRD9M-C-DC= Recloser is Swicth Input Control Mode, DC12V
(For example: Connect with Relay, as a switch)
GRD9M-C-AC= Recloser is Swicth Input Control Mode, AC220V
(For example: Connect with Relay, as a switch)
GRD9M-S-DC= Recloser is RS485 Control Mode, DC12V
(Connect with Computer or PLC)
GRD9M-S-AC= Recloser is RS485 Control Mode, AC220V
(Connect with Computer or PLC)
GRD9M-R-DC= Recloser is Auto Reclose Control Mode, DC12V
(Autoreclose time 10s, 60s, 300s...could be customized)
GRD9M-R-DC= Recloser is Auto Reclose Control Mode, AC220V
(Autoreclose time 10s, 60s, 300s...could be customized)
GYM9+RD miniature circuit breaker with remote control the opening and closing function is mainly used forprotection against overload and short circuit under the AC 50Hz/60Hz, reted voltage 230V/400V and rated current from 6A to 63A. It also can be used for non-frequent on-and-off switch operation under normal circumstance.
-Control module and MCB using the built-in drive.
-Can choose to open or close the RD module.
-The RD module can be locked by a padlock.
-In complicance with IEC/EN60898-1.
-With indicator function in the contact position.
-Bilateral busbar wiringcapabilities to adapt to thewider use of premises.
-Maximum connecting ability of 25mm2 , wiring torque 3N*m, applicable to a variety of installing equipments, wiring stronger.