Automation Relay,Circuit Breaker,Contactor,Isolation Switch,Light,Other Electrical Equipment,Pneumatic,Power Quality,Solar Energy Storage System,Surge Protection Device,Timer Switch,Topsales Products,Transfer Switch,Ungrouped
Technical parameters | GRT6-ST |
Function | Delay ON star/delta |
Supply terminals | A1-A2 |
Voltage range S240 | AC/DC 24-240V(50-60Hz) |
Burden S240 | AC 0.7-3VA/DC 0.5-1.7W |
Voltage range A230 A400 | AC 230V,AC400V(50-60Hz) |
Power input A230 A400 | AC max.6VA/1.3W |
Supply voltage tolerance | -15%;+10% |
Supply indication | green LED |
Time ranges | Range of time delay t1:0.1s-10min,Switch time t2:0.1 s-1s |
Time setting | potentionmeter |
Time deviation | 10%-mechanical setting |
Repeat accuracy | 0.2%-set value stability |
Temperature coecient | 0.05%/℃,at=20℃(0.05%°F,at=68°F) |
Output | 2×SPDT |
Current rating | 10A/AC1 |
Switching voltage | 250VAC/24VDC |
Min.breaking capacity DC | 500mW |
Output indication | red LED |
Mechanical life | 1×107 |
Electrical life(AC1) | 1×10⁵ |
Reset time | max.200ms |
Operating temperature | -20℃ to +55℃(-4F to 131F) |
Storage temperature | -35℃ to +75℃(-22F to 158F) |
Mounting/DIN rail | Din rail EN/IEC 60715 |
Protection degree | IP40 for front panel/IP20 terminals |
Operating position | any |
Overvoltage cathegory | Ⅲ. |
Pollution degree | 2 |
Max.cable size(mm²) | solid wire max.1×2.5or 2×1.5/with sleeve max.1×2.5(AWG 12) |
Tightening torque | 0.4Nm |
Dimensions | 90×18×64mm |
Weight | S240-82g,A230-80g |
Standards | EN 61812-1,IEC60947-5-1 |